Showing posts with label Mitigation. Show all posts
Showing posts with label Mitigation. Show all posts

Sunday, February 5, 2012

Suncourt RDN04 Radon Mitigation Fan Kit

!±8±Suncourt RDN04 Radon Mitigation Fan Kit

Brand : SunCourt
Rate :
Price :
Post Date : Feb 05, 2012 18:23:33
Usually ships in 1-2 business days



Radon is a deadly gas that can easily accumulate in your newer or older home, whether you have a full or partial basement, crawl space, or cement slab. You may be breathing harmful levels of radon and not know it. Have you tested your house for radon? Purchase a radon test kit today.

WHAT IS RADON?

  • Radon is a colorless, odorless tasteless radioactive gas
  • Radon comes from naturally decaying uranium 289 in soil, rocks and water
  • Radon is a known carcinogen
  • Radon is the second leading cause of lung cancer, next to smoking
  • 1 in 15 homes in the U.S. has high levels of radon
  • Radon is found in all 50 states
  • Radon accumulates in poorly ventilated areas of the home such as basements and crawlspaces

No level of radon is safe in your home. Upon receiving test results and learning of elevated radon levels, mitigation solutions are your next step. Suncourt Radon Fans (TF104-W) or kits (RDN04) are used as the front line of defense against elevated radon levels in the home. Suncourt's radon mitigation products are an effective way to reduce radon related health risks to you and your family.

HOUSING

  • UV resistant, UL listed plastic
  • Epoxy sealed to prevent leakage
  • Watertight
  • Approved for mounting indoors/outdoors

MOTOR

  • Enclosed for protection
  • Automatic thermal reset for overload protection
  • High efficiency impeller
  • Quality you can trust
  • 5 year limited factory warranty

The Centrax Radon Fan Kit (RDN04) comes with one 4" fan, mounting hardware and two white rubber couplers.

 

Specs:

Model: TF104-W (+ Mounting Hardware & Couplers)


Duct Dia: 4"

Amps: .53

Watts: 40

Volts: 120

Hz: 60

Sones: 4

dBA: 60

CFM: 200

Frabill Classic Wood Tip-up... Discounted Matchbox 2010 City Action 67 Of 100 City Bus (white)... Immediately Good Insinkerator 333

Monday, October 17, 2011

Radon Mitigation Installation Step by Step - Save Hundreds of Dollars

!±8± Radon Mitigation Installation Step by Step - Save Hundreds of Dollars

What should you do if you've discovered that you have radon gas in your home. As a licensed radon mitigation technician I can tell you the first thing not to do is panic. There's no need to be alarmed because this problem can be corrected quick and easy for minimal dollars, considering what an average radon installation would cost from a radon company. There are a few things that you can do immediately to help instantly lower your radon levels.

Before you hire a radon mitigation company to take action with their radon remediation process, consider the things you can do yourself first. You're guaranteed to save hundreds of dollars if you can lower the levels below 4pCi/L yourself. Below 4pCi/L is considered safe by the EPA. Many times you can get the levels lower that 4pCi/L. This is possible to achieve without installing an active radon mitigation system, depending on how high the levels are, and a few other variables as well.

Let's take a look at some things that can be done immediately:

Seal your crawl space with 6mil plastic - This is usually a huge source for radon entry into your home, and by putting a barrier down to seal the ground you'll suppress the gas and achieve lower radon levels. Seal your sump pit - This is another area of massive radon entry due to the simple fact that it a direct hole into the ground and has perimeter drain tile looping around your entire basement ending inside your sump pit. This allows radon to freely float through the drain tile and into your basement through your sump pit. Seal all floor cracks - When you have cracks in your concrete floor slab, it allows a path of least resistance to occur. Radon gas can and will easily flow through these cracks. You should seal your expansion joints as well. These are the cuts in the floor that came from the builder. These can also be a source over time. Seal the floor to wall seam - Some homes will have a gap between the floor to wall seam. This can be another source of radon entry. Even if it appears that there's no gap, it's still a good idea to seal it anyway because radon can and will still come through. Seal any plumbing rough in - Many times a plumbing rough in is cut into the floor for the homeowner to utilize when they install a bathroom or shower etc... The cut is usually all the way through the slab and filled in with pea gravel. This will also nee a temporary seal on it until you use it. Seal Penetrating floor Pipes - Seal around all penetrating floor pipes. many time they have open nooks and cranny that easily allow radon gas to penetrate.

There are more things that can be done yourself, but if you start with these things you'll have a huge jump-start on reducing the radon levels. You'll need to perform a post radon test in your home after you perform these passive radon reduction techniques. Believe me, you'll save hundreds and hundreds of dollars if you can get the levels down yourself, without hiring a radon mitigation company.


Radon Mitigation Installation Step by Step - Save Hundreds of Dollars

Buyers Weber Kettle Bbq Catalog Xantrex Inverters


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。







Sponsor Links