In addition to causing destruction, water damage also has a negative impact on air quality in the interior of your home.
Water damage can lead to rot, insect infestation and mold.
The obvious causes of water damage are leaking roofs, windows, doors, foundation cracks and visible pipe leaks.
These are relatively easy to recognize, so that there is a quick fix before the maximum damage.
The not so obvious culprits are moisture behind finished basement wallsinsulated with fiberglass, inappropriate content from foundation walls and losses that occur between the living room and the attic.
Finished basement walls with fiberglass insulation is not a good idea.
Fiberglass does not absorb water and allow the wall by traveling, avoid a drying effect.
Some people think installing a plastic barrier in the wall is the answer, but this approach only traps moisture.
A better way is to use, insulation means (also known as blueboard).
This insulation is semi-permeable and allows moisture to travel through the wall, so that dry.
Water can also be the basement, whether the degree of the earth will be added to the house.
Classification of the soil away from the house and adding rain gutters will cause the rain water away from the house.
Openings from the house into the attic and ceiling insulation in poor homes in colder climates are able to ice dams that cause water back into the thingHouse.
Tightness in the attic of the house will bring moisture in the form of moisture in the attic, the water on the underside of the roof, which can rot and mildew to form.
Typical leakage points between the house and attic are:
leaking roof hatches Holes for plumbing pipes and electric lines, which drilled to penetrate into the attic and are usually not sealed Recessed lighting, which is not hermetically sealed Vacuums that vent directly into theAttic
For those who live in warmer climates, water damage in walls, occur because of poorly designed air conditioning systems.
Systems that are oversized (a larger capacity than necessary) will not be sufficient to remove moisture, excessive humidity, condensation on cooler surfaces leading.
Channel systems, which are unbalanced outside humidity through walls that can produce water in the walls of the stand.
Mitigating these problems requires aProfessional.
Repair the problems listed above the attic may seem simple enough, but try it yourself we do not assume any responsibility for actually solved the problem and can sometimes lead to other problems.
Setting the isolation of an expert who specializes in building science (also known as a specialist building services) to ensure that the job is done correctly and safely.
These are equipped with tools such as blower doors specilaists, printer languages, etc. equipped to quantify the measuresfor repair.
The same applies to the specialist air conditioning, he should channel diagnostic tools to test your tubes, make sure it is properly designed and performing efficiently.
If you are not able to have someone in your area to http://www.energyconservatory.com.
Are you a manufacturer of test equipment and are entrepreneurs in their database they recommend.
In addition to managing water damage, your homemore comfort, you'll save on energy bills and improve indoor air quality.
No comments:
Post a Comment